Products 1-12 of 77
Show
VRM-ODSP-W

The VRM-ODSP-W is aimed at LTE, LTE Advanced and 5G systems that require MIMO technologies and enables complete RF to Layer 3 wireless base station functionality to be implemented on a compact, single-wide AdvancedMC module. Combining four RF channels with DSP, FPGA and ARM based processing, this module includes a comprehensive range of software including a Linux operating system, L2/L3 stack, virtualized core network software and software defined radio PHY firmware. A GPS antenna input on the...

VRM-SDR-BASE AMC SDR Base Station

The VRM-SDR-BASE is a dual-sector software defined base station platform that supports any combination of LTE, UMTS/HSPA, CDMA2000 or GSM sectors. The VRM-SDR-BASE is also a perfect platform for developing custom waveforms and implementing LTE Advance and 5G systems which require MIMO capability and demand high processing power. This single-width mid-size AMC module houses four DSPs, two NXP quad-core ARM CPUs and a powerful Xilinx FPGA. There are two Analog Devices AD9361 RF SoCs on the RF...

VRM-Native-C1

The VRM-Native-C1 offers the performance benefit of MicroTCA in a space-saving horizontal-mounted 1U height. Six AdvancedMC (AMC) slots offer users the flexibility to configure for a wide range of applications, enterprise, industrial control, telecom, wireless, and others. The unique card guide design of the VRM-Native-C1 eases the insertion/removal of AMC cards. The replaceable backplane improves the serviceability of the system. The VRM-Native-C1 equips with higher performance cooling unit –...

VRM-ZYNQ-FMC

The VRM-ZYNQ-FMC is an AdvancedMC (AMC) featuring a Xilinx ZYNQ®-7000 FPGA and an FPGA mezzanine card (FMC) slot. This single-width, mid-size AMC is designed for data acquisition, processing applications and computing nodes. The ZYNQ-7000 FPGA provides the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, enabling key analytics and hardware acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device. This...

VRM-AMC-627

The VRM-AMC-627 is a second generation storage product HBA single module, mid-size (option for full-size) AdvancedMC™ (AMC) form factor based on the AMC.1 specification. The module has an on-board 2.5” disk with additional SATA/SAS ports routed to ports 2-3. The storage module also has hardware RAID 0 (striping), 1 (mirroring), 1E (enhanced mirroring), and 10 (mirroring + striping).

VRM-NATIVE-MINI

The VRM-NATIVE-MINI is a MicroTCA chassis targeted at cost-sensitive applications like digital video and image editing, automation or electronic signal processing with the need for one or two payload slots only. With its compact dimensions of 260 mm width, 43 mm height (1U) and 302 mm depth the EMV-shielded VRM-NATIVE-MINI is designed for the insertion of up to two single full-size or mid-size AMC modules (Advanced Mezzanine Card) and therefore aims for applications which require just one or...

VRM-PM-AC1000 1000 W microTCA Power Module

The VRM-PM-AC1000 is a 1000W full-size, double-width MicroTCA (μTCA™) AC/DC power module that provides payload and management power for up to 12 advanced mezzanine cards (AMCs), two cooling units and two MicroTCA carrier hub (MCH) modules. It is a hot swappable, fully redundant and high efficiency power module ideally suited for all air-cooled systems. The VRM-PM-AC1000 provides power conversion from one wide-range 110-240 VAC input source to 16 independent 12 V channels for payload power and...

VRM-NAMC-MMC-REF

Module Management Controller (MMC) Reference and Design Package Any Advanced Mezzanine Card (AMC) that is compliant with the PICMG AMC.0 specification has to implement a Module Management Controller (MMC) so that is can be manged by shelf and carrier managers via the Intelligent Platform Management Interface (IPMI). The VRM-NAMC-MMC-REF Design enables customers to implement a fully AMC and IPMI compliant MMC on their custom AMCs, benefiting from V Rose's MMC expertise and experience origin...

VRM-ODSP-M

The VRM-ODSP-M enables you to add video and audio acceleration to your AdvancedTCA® (ATCA®) and MicroTCA® (µTCA, MTCA) systems. It provides a broad range of audio/video codecs and algorithms, including H.264, MPEG4, H.263, and G.711, G.729, SILK and Opus, in a compact AMC module. We have enhanced this standard functionality with additional video and voice quality features. An on-board FPGA simplifies management while enabling you to extend and customize the module to suit the exact needs of...

VRM-SDR

The VRM-AMC-SDR is a flexible software defined radio (SDR) platform for developing, prototyping and testing 5G massive multiple input, multiple output (MIMO and M-MIMO) base station transceiver (BTS) systems and proprietary or standard implementations of UMTS, LTE / LTE-Advanced systems, as well as a variety of applications ranging from cognitive radios to resilient security networks. We have collaborated with Fraunhofer Heinrich Hertz Institute (HHI) to integrate IDT’s IQ compression...

VRM-NAMD-ODSP

The VRM-NAMC-ODSP enables you to add video and audio acceleration to your AdvancedTCA® (ATCA®) and MicroTCA® (µTCA, MTCA) systems. It provides a broad range of audio/video codecs and algorithms, including H.264, MPEG4, H.263, and G.711, G.729, SILK and Opus, in a compact AMC module. We have enhanced this standard functionality with additional video and voice quality features. An on-board FPGA simplifies management while enabling you to extend and customize the module to suit the exact needs of...