VRM-C45-SATA
Available as a mezzanine add-on expansion module to EKF CompactPCI® CPU cards, the main purpose of the VRM-C45-SATA is to provide SATA and USB connectors for front panel I/O. In addition, the C45-SATA can accommodate an on-board 1.8-inch Micro SATA SSD. As an option, the drive is removable through t ...
Request a Quote for Ordering Info
|
VRM-CB1-X
This product is obsolete and not recommended for new projects.
The VRM-CB1 is a dual-port USB host controller suitable for any industrial computer systems based on the CompactPCI bus. It is housed on a single-size Eurocard (3U) and is provided with two USB ...
Request a Quote for Ordering Info
|
VRM-CB2-X
The VRM-CB2-X is a 5-port USB2.0 host controller. The 3U CompactPCI® board complies with the Universal Serial Bus Specification Revision 2.0 and Open Host Controller Interface (OHCI) Specification for full-/low-speed signalling and the Intel Enhanced Host Controller Interface (EHCI) Specification fo ...
Request a Quote for Ordering Info
|
VRM-CC6-X and VRM-CC0
This product is obsolete and not recommended for new projects.
The VRM-CC6-X Super I/O module is available as a companion board to the VRM-CC5, VRM-CC7 and VRM-CC8. The VRM-CC6-X is provided with the most common legacy I/O ports of a classic PC. Interconnec ...
Request a Quote for Ordering Info
|
VRM-CE2-X
The VRM-CE2-X is a CompactPCI Dual ATA CompactFlash controller based on an integrated Ultra ATA/100 IDE controller, and it can be used with any popular ATA True IDE Mode CompactFlash type I or II cards, either Flash (silicon disk) or microdrive (rotation disk) modules. The VRM-CE2-X is a compact and ...
Request a Quote for Ordering Info
|
VRM-CE4
The CE4-PIANO is available in different flavours. Bottom-of-the-range, the board is equipped with a PCI to SATA controller chip and an onboard SATA hard disk (or SATA silicon state drive). This combination is a straightforward mass storage solution - plug and play.
For maximum fle ...
Request a Quote for Ordering Info
|
VRM-CE5
The VRM-CE5-X is a quad port Serial ATA host adapter, compliant with SATA 1.0 specification. The CompactPCI® board can be optionally equipped with a 2.5” on-board hard disk drive ...
Request a Quote for Ordering Info
|
VRM-CG2
The VRM-CG2 CompactPCI 3U GPS Receiver Module is provided with a high performance receiver engine continuously tracking all satellites in view for a time accuracy better than 1us and horizontal accuracy better than 3m. The receiver is compatible with passive or active antennas and supports the NMEA- ...
Request a Quote for Ordering Info
|
VRM-CH1-X
The VRM-CH1-4 is a high performance audio accelerator add-in card for CompactPCI systems. The 3U board exceeds the Microsoft PC 99 audio performance specifications and complies with the Intel AC '97 spec. The VRM-CH1-4 provides a complete suite of analog connections. ...
Request a Quote for Ordering Info
|
VRM-CI1-X
The VRM-CI1 is a Passive Terminal Adapter with ISDN basic rate S/T interface. The 3U board achieves a data rate of 128kBit/s uncompressed (both B channels aggregated). The VRM-CI1 complies with international and European ISDN standards as ITU-T 1.430, and is bundled with essential software stack and ...
Request a Quote for Ordering Info
|
VRM-CS3-X
The VRM-CS3 is a CompactPCI based Ultra2 SCSI Hostadapter, suitable for attachment of LVD/SE 16-bit peripherals like Raid-systems, high performance hard disks and streamer tape drives. The VRM-CS3 allows for connecting of up to 15 peripherals with 16-bit (Wide) connector.
...
Request a Quote for Ordering Info
|
VRM-CS5-X
The VRM-CS5-X is a CompactPCI based Dual Ultra160 SCSI hostadapter; suitable for attachment of LVD/SE 16-bit peripherals as Raid-systems, high performance hard disks and streamer tape drives. With the VRM-CS5-X, any CompactPCI system can profit from dual Ultra160 SCSI performance. It is an affordabl ...
Request a Quote for Ordering Info
|
VRM-CV1-X
THIS PRODUCT IS NO LONGER AVAILABLE. THE REPLACEMENT VRM-CV2 IS COMING SOON!
The VRM-CV1-X is a CompactPCI Visual Graphics Adapter for Digital and Analog Monitors. Housed on a 3U Eurocard, the VRM-CV1-X is equipped with both, DVI and D-SUB connectors for simult ...
Request a Quote for Ordering Info
|
VRM-CX1-X
This product is obsolete and not recommended for new projects.
The VRM-CX1 is a CompactPCI based, intelligent fieldbus controller with two independent CAN (Controller Area Network) ports ...
Request a Quote for Ordering Info
|