VRM-CF2-X
The VRM-CF2 is a 400Mbps IEEE 1394a-2000 FireWire OHCI compatible hostadapter, suitable for any high performance CompactPCI industrial computer systems. With its triple 1394 cable port, the VRM-CF2 can be operated as a controller (master) and transceiver. Typical target peripherals of the 1394 seria ...
Request a Quote for Ordering Info
|
VRM-CN1-X
This product is obsolete and not recommended for new projects.
The VRM-CN1 host adapter interfaces with CompactPCI systems to the most popular networking class, the 10/100Mbit/s Ethernet/Fast-Ethernet LAN. The 3U (single size Eurocard) is provided with a Tw ...
Request a Quote for Ordering Info
|
VRM-CN4-X
The VRM-CN4 is a quad Fast Ethernet networking interface controller for CompactPCI systems. It is suitable for a wide range of applications with need for multiple networking controllers, e.g. firewall, gateway, router, or as a fieldbus data concentrator. High availability systems profit from the red ...
Request a Quote for Ordering Info
|
VRM-CN5-X
This product is obsolete and not recommended for new projects.
The VRM-CN5-X is a Gigabit Ethernet networking interface controller (NIC) for CompactPCI systems. The 3U board is equipped with a new generation single-chip controller, and can be integrated smo ...
Request a Quote for Ordering Info
|
VRM-CN6-X
The VRM-CN6-X is a CompactPCI Dual Gigabit Ethernet Controller Dual Channel Universal Host Adapter 10/100/1000Mb/s. The design of the VRM-CN6-X is based on a modern single-chip integrated dual MAC/PHY, thus minimizing the power consumption. The board is provided with a 128kx8 Flash EPROM, suitable f ...
Request a Quote for Ordering Info
|
VRM-CN7
The VRM-CN7 is a CompactPCI® peripheral card, suitable for any common 32-bit CPCI parallel backplane, either 33MHz or 66MHz clock. Since the 82574IT Ethernet controllers are based on the PCI Express® high speed serial interface, the proven PLX PEX8112 PCI to PCI Express® bridge is provided on-board, ...
Request a Quote for Ordering Info
|
VRM-CU4-X
The VRM-CU4-X features a Quad PCI UART, compatible with 16C550 (and also 16C450, 16C650, 16C750, 16C950), FIFO 1/16/128Byte
...
Request a Quote for Ordering Info
|
VRM-CU7-X
The VRM-CU7-RS485-X is an isolated RS-485 Rear-I/O module, destined for CompactPCI® systems, to be used in combination with the serial interface cards VRM-CU1 and VRM-CU2. It is provided with an electrically isolated TIA-485 data transceiver for EMI sensitive applications. Designed for harsh environ ...
Request a Quote for Ordering Info
|
VRM-MIC-3753
The VRM-MIC-3753 is a 72-channel digital I/O card for the PCI bus. The card emulates mode 0 of the 8255 PPI chip, but the buffered circuits offer a higher driving capability than the 8255. The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1, B1, C1, A2, B2, C2, A3, B3 and C3. Us ...
Request a Quote for Ordering Info
|
|