|
The VRM-PMC-4E1/T1 is a highly efficient low-cost PMC module offering four E1 or T1 interfaces as well as access to the standard division multiplex (TDM) H.110/SCSA bus. The module can be plugged into any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling high scalable, cost effective systems. Features:
PCI Interface: 66MHz, 64-bit, termination Shottky diodes on all PCI signals
I/O Signals: All 64 I/O signals
LED’s: All power supply lines drive signalling LED’s
Power Consumption: Current drawn from +3.3V, +5V, +12V,-12V, V (I/0): less than 10mA each.
+3.3V, +5V, V (I/O), and GND connected to separate power planes
Environmental conditions: Operating and Storage Temp: -40ºC to +85ºC, Relative Humidity: 5% to 90% (non-condensing)
Standards compliance: PCI Rev 2.2 IEEE P1386.1 / Draft 2.4a
|
Request a Quote for Ordering Info See more products in PMC Communication ProductsRead the Datasheet
|