|
The VRM-CPCI -EXT64 is a passive 64-bit CompactPCI extender board, i.e. it does not contain any circuitry but two CompactPCI connector sets. One is used to plug into the backplane of the chassis and the second is dedicated to receive the board under test. The VRM-CPCI -EXT64 is ideally suited for debugging and testing CompactPCI cards with or without H.110 bus in a CompactPCI chassis. Features:
CompactPCI Interface: 33/66Mhz, 64-bit
Power Consumption: Current drawn from +3.3V, +5V, +12V, -12V,V (I/O): less than 10mA each.
+3.3V, +5V, V(I/O), and GND connected to separate power planes
All power supply lines drive signalling LEDs. All power supply lines may be cut
By opening wire bridges for current measurements.
Environmental conditions: Temperature: -40ºC to +85ºC (operating and storage)
Humidity: 5% to 90% (non-condensing)
Standards compliance: PCI Rev. 2.4a PICMG 2.1 R2.0 PICMG 2.5 R1.0
|
Request a Quote for Ordering Info See more products in 6U Transition Modules and CarriersRead the Datasheet
|