Product: VRM-CPCI-PMC

The VRM-CPCI-PMC is a carrier board for PMC’s in 6U CompactPCI form factor. Unlike the traditional PMC carriers, the VRM-CPCI-PMC is well suited for running in telecommunication platforms. The board offers the H.110 bus (PICMG2.15) allowing TDM data from and to the two PMC sites to be distributed among different peripheral boards, such as line interfaces and DSP processing boards, using this standardized bus

Features:

PCI Interface: Intel i21555 PCI-to-PCI bridge (66MHz, 64bit), PCI Rev 2.2
H.110 Bus: Agere T8110 TSI, H.110 on cPCI J4 connector, SCbus on PMC P14 connector
PMC Slots: Two 64-bit/66MHz PCI Rev 2.2. IEEE P1386.1/ Draft 2.4a compliant PMC slots on the PCI
Internal bus, I/O P14 connector used as SCSA bus connected to the T8110TSI H.110 device.
Hot Swap Capability: Full Hot Swap
Power Consumption: 3.3V 0.5A (typ.) 5V 0.1A (typ.) The 3.3V supply for PMCs is derived from the 5V supply
by onboard switching regulator
Environmental: Temperature (operating): 0ºC to +60ºC with forced air cooling
Temperature (storage): -40ºC to +85ºC
Relative Humidity: 10% to 95% at +55ºC (non-condensing)
Standard Compliance: PCI Rev 2.2. PICMG2.1 R2.0 PICMG 2.5 R1.0 IEEE P1386.1/ Draft 2.4a

Request a Quote for Ordering Info

Read the Datasheet