Product: VRM-PMC-DSP

The VRM-PMC-DSP is a multi-purpose telecommunication resource board in PMC form factor. The VRM-PMC-DSP is targeted at Telecom applications with extensive need for voice or data computation. The module is designed to process standard telecom algorithms, i.e. voice and data compression and decompression or DTMF detection and generation. The module is capable of handling individual timeslots within a TDM stream selected from the H.110 backplane. The design is optimized for handling in parallel as many timeslots (TDM data) as possible. The TDM data streams are supplied by a standard H.110 backplane interface located on the PMC multi-purpose I/O connectors.

Features:

PCI Interface and Compliance: PCI Rev 2.2, 33 MHz/32 bit
H.110 Bus (and subsets thereof): H.110 (PTMC conf. type 5) or SCSA subset, integrated in a Cyclone I FPGA from Altera
DSP’s: Eight ADSP-BF535P Blackfin DSP from Analog Devices, 350MHz core frequency, 700 MMACS, 3.5 MIPS per TDM channel
Memory: 32MB SDRAM and 1-4MB FLASH per DSP
Indicator LEDs: 4 software programmable LEDs and 1 status indicator LED per DSP at the front panel
Host Operating System Support: OK-1, VxWorks, LINUX, dependent on application
Power Consumption: 3.3V 0.8A (typ.) 5V 1.0A (typ.)
Environmental: Temperature (operating) 0ºC to + 60ºC with forced air cooling / Temperature (storage) -40ºC to +85ºC / Relative Humidity: 10% to 90% at +55ºC (non-condensing)
Standard Compliance: P1386 and P1386.1/ Draft 2.a PICMG 2.15 configuration type 5
Applications: Voice and data compression and deflating; Voice and data encryption and decryption; DTMF detection and generation, VoP, special handling of signaling products (i.e. SS7, 3G, TFO, etc.)

Request a Quote for Ordering Info

Read the Datasheet