Product: VRM-CCD-X

The VRM-CCD-X 3U, Advanced CompactPCI CPU board is scalable from the ULV Celeron® M processor up to the 2.0GHz Pentium®M, and provided with 2GB dual channel capable DDR2 RAM.

The VRM-CCD-X is a versatile 4HP/3U CompactPCI® CPU board, designed especially for systems which require high performance at low power consumption. The chipset is based on PCI Express technology and has a powerful dual-screen integrated graphics accelerator. The DVI-I video interface allows for simultaneous attached of both, advanced (digital) and legacy (analog) flat panel displays and CRT monitors (D-SUB connector optionally). The VRM-CCD-X is equipped with two independent PCIe Gigabit Ethernet controllers for high speed communication. Seven USB 2.0 ports are provided for attachment of peripheral devices. In addition, an onboard CF socket accommodates either a CompactFlash memory card or Microdrive®. As an alternate, an 1.8” hard disk module is available as on-board mass-storage device (option). A local expansion interface connector may be used to directly attach a mezzanine companion board for audio and legacy support, which can carry in addition a 2.5” IDE hard disk drive. As an option, a rear I/O transition module is available to the VRM-CCD-X, which provides the Serial ATA connectors (2 x SATA, 2 x eSata)

Features:

- FORM FACTOR: CompactPCI Single size CompactPCI style Eurocard (160x100mm²), front panel width 4HP (20.3mm)

- PROCESSOR: Designed for Intel® Pentium® M Micro FC-BGA 479 processors (90nm Dothan), maximum junction temperature 100ºC
VRM-CCD-2: 1.0GHz ULV Celeron®M (Dothan 373), 400 MHz FSB, 512KB L2 cache, 5W
VRM-CCD-3: 1.4GHz LV Pentium®M (Dothan 738), 400 MHz FSB, 2MB L2 cache, 10W
VRM-CCD-6: 2.0GHz Pentium®M (Dothan 760), 533MHz FSB, 2MB L2 cache, 27W

- CHIPSET: Intel® i915GM (Sonoma) chipset consisting of:
82915GM Graphics/Memory Controller Hub (GMCH) with Intel® Graphics Media Accelerator (GMA) 900
82801FB I/O Controller Hub (ICH6)
82802 Firmware Hub (FWH)
- MEMORY: Dual 200-pin SO-DIMM socket, DDR2 533 SDRAM, 2 x 1GB maximum, symmetric dual channel capable

- VIDEO I/O:
Analog monitor and digital flat-panel display support by DVI-I connector (front panel), up to 2048x1536 pixel 16M colors @ 75MHz refresh rate (analog), up to 1600 x 1200 pixel 16M colors @60Hz (digital), incorporates PanelLink Digital technology (Silicon Image).
Front panel option: D-Sub (female HD15) VGA connector available, replaces DVI-I connector
Rear I/O option: Analog video across J2/P2 (VRM-CCT-RIO rear I/O transition module)
Dual screen capable 2x1600x1200 pixel (one display attached to front panel, the other to back panel, or both to the front by means of a DVI-I splitter cable)

- USB I/O: All ports over-current protected, data transfer rate of up to 480Mbps, conforming to USB2.0:
2 x USB type A connector (front panel)
2 x USB J2/P2 Rear I/O option (VRM-CCT-RIO rear transition module)
2 x USB expansion interface option (VRM-CCA/VRM-CCB mezzanine companion boards)

- ETHERNET I/O: Dual 10/100/1000Mbps Gigabit Ethernet controller, accessible via RJ45 jacks from the front panel, or as an option across J2/P2 with attached VRM-CCT-RIO rear I/O transition module

- MEZZANINE I/O:
On-board LPC/USB/AC97 Super-I/O, USB and audio interface connector
Suitable VRM-CCA/VRM-CCB mezzanine companion boards available
PATA (IDE):
Ultra ATA/100 connector, handover to VRM-CCA/VRM-CCB mezzanine expansion board with optional on-board 2.5” hard disk drive or external device
Compact Flash socket for a CFA ATA memory card or Microdrive®
Option 1.8” on-board hard disk module, replaces Compact Flash facility

- SATA (Serial ATA): Triple-channel Serial ATA I/F available for J2/P2 rear I/O option, suitable rear I/O transition module VRM-CCT-RIO (2x system-internal SATA, 1 x eSATA for attachment of external devices)

(more on data sheet)

Request a Quote for Ordering Info

Read the Datasheet