... ...
Home
News
Products
Services
Contact Us
Partners
Legal
Site Map

VRM-CCG-XYZ (3U System Blades)

The VRM-CCG-XYZ is a versatile 4HP/3U (single size Eurocard) CompactPCI® CPU board, equipped with an Intel® Core™ 2 Duo processor at 2.2GHz clock, and up to 4GB dual channel capable DDR2 RAM. Three Serial ATA channels are available for rear I/O. The VRM-CCG-XYZ has been designed especially for systems which require very high performance at moderate power consumption. The VRM-CCG-XYZ is provided with a high performance mobile chipset (Intel® GM965) which operates at up to 800MHz FSB and up to 667MHz DDR2 memory clock for optimum system throughput. An on-board CF connector can accommodate either a CompactFlash memory card or a Microdrive®. As an alternate, a 1.8” hard disk module is available as on-board mass-storage device (option). The chipset is based on PCI Express technology and has a powerful dual-screen integrated graphics accelerator. Two Gigabit Ethernet controllers are provided for high speed connectivity. As an option, a mezzanine card is available that allows using the VRM-CCG-XYZ in addition as CompactPCI® Express system slot controller (especially suited for hybrid dual backplane systems). Local expansion interface connectors can be optionally used to directly attach a mezzanine companion sideboard, either for audio– and legacy support, or equipped with PCI Express based I/O circuitry. Mezzanine cards can carry in addition a 2.5” hard disk drive. Also as an option, a suitable rear I/O transition module is available to the VRM-CCG-XYZ, which ie. Provides the Serial ATA connectors.











Features:

Processor- Designed for Intel® Core™ 2 Duo second generation dual core mobile processors (codename Merom), dynamic FSB switching, 800/667/533MHz FSB, maximum junction temperature 100°C, Intel® Core Multiprocessing (CMP), Intel® Virtualization Technology (VT), Intel® 64 Architecture
* VRM-CCG-1: 1.06GHz U7500 Intel® Core™ 2 Duo ULV, 533MHz FSB, 2MB L2 cache, TDP ˜ 10W (low power applications)
* VRM-CCG-2: 1.2GHz U7600 Intel® Core™ 2 Duo ULV, 533MHz FSB, 2MB L2 cache, TDP ˜ 10W (low power applications)
* VRM-CCG-4: 1.6GHz L7500 Intel® Core™ 2 Duo ULV, 800MHz FSB, 4MB L2 cache, TDP ˜ 17W (general purpose applications)
* VRM-CCG-6: 2.0GHz Intel® Celeron® M 550, 533MHz FSB, 1 MB L2 cache, TDP 27W (value applications, single core)
* VRM-CCG-8: 2.2GHz T7500 Intel® Core™ 2 Duo, 800MHz FSB, 4MB L2 cache, TDP 35W (performance applications)
Chipset– Intel® GM965 (Codename Crestline) chipset comprised of:
* GM965 Graphics/Memory Controller Hub (GMCH) with Intel® Graphics Media Accelerator (GMA), dual independent display, DirectX 10 and OpenGL 2.0 support, generation 4 graphics core, 1.5 x 945GM graphics performance, AMT manageability engine.
* ICH8M-DO Enhanced I/O Controller Hub, integrated GbE MAC, dual USB EHCI controllers (no shared bandwidth), 3 x SATA 3Gbps, MST and RAID, unified SPI Flash support
Memory– Dual 200-pin SO-DIMM socket, DDR2 667 SDRAM (PC5300), 4GB (2 x 2GB) maximum, single or dual channel mode operation, configurations:
* 256Mb, 512Mb, 1Gb, 2Gb technologies for x8 and x16 devices
* Dual channel symmetric– memory addresses interleaved for increased performance, but memory module sizes must match
* Intel® Flex Memory Technology (dual channel interleaved mode with unequal memory population)- memory module sizes maybe unequal I in both channels
* Dual channel asymmetric– memory module sizes may differ, including no memory in the second channel (single-channel)
* Channel 0 must be populated first
Video I/O– Analog monitor and digital flat display support by DVI-I connector (front panel), up to QXGA 2048x1536 pixel 16M colours @ 75Hz refresh rate (analog), up to 1600 x 1200 pixel 16M colours (digital), incorporates PanelLink Digital technology (Silicon Image).
* Dual screen capable 2 x 1600 x 1200 pixel (one display attached to the front panel, the other to the back panel, or both to the front panel by means of a DVI-I to DVI-D/VGA splitter cable, or secondary DVI-D connector on mezzanine sideboard)
* Front panel option: D-Sub (female HD15) VGA connector available, replaces DVI-I connector
* Rear I/O option: Analog video across J2/P2 (VRM-CCT-RIO rear I/O transition module)
* Mezzanine option: Secondary DVI-D connector at mezzanine card front panel allows for dual digital flat panel operation, suitable mezza nine modules i.e. VRM-CCH or VRM-CCJ).
USB I/O– All ports over-current protected, data transfer rate of up to 480Mbps, conforming to USB2.0
* 2 x USB type A connector (front panel)
* 3 x USB J2/P2 Rear I/O option (VRM-CCT-RIO rear I/O transition module)
* 2 x USB ports expansion interface option (VRM-CCH or VRM-CCJ mezzanine companion board)
* USB Flash drive module C15-DON option (USB stick on-board)
* Dual EHCI/ five UHCI controllers provided by ICH8
Ethernet I/O– Two 10/100/1000Mbps Gigabit Ethernet controller, accessible via RJ45 jacks from the front panel
* ETH1 equipped with Intel® 82566 PHY (Codename Nineveh), serves also as AMT out of band communication path (MAC provided by I CH8)
* ETH2 equipped with Intel® 82573 GbE controller connected to PCIe lane
* Option ETH2 Gigabit Ethernet configurable (BIOS) across J2/P2 with attached VRM-CCT-RIO rear I/O transition module
Mezzanine Sideboard I/O– LPC/USB/Audio (Super I/O, USB and Azalia HD Audio) expansion interface connector
* ATA/IDE expansion connector
* PCI Express 4-lane (configurable as 1 link x 4) high speed expansion connector
* SVDO secondary digital graphics port high speed expansion connector
* Suitable mezzanine companion boards available: VRM-CCE, VRM-CCH, VRM-CCJ, VRM-C10-1-CFA, VRM-C10-2-CFA, VRM-C15-DON
PATA (IDE)- Ultra ATA/100 connector, handover to VRM-CCE/VRM-CCH, VRM-CCJ mezzanine expansion board with optional on-board 2.5” hard disk drive or external device
* CompactFlash socket C10-1-CFA supplied for a CFA ATA memory card or Microdrive®
* Option 1.8 inch on board hard disk module, VRM-C10-2-CFA, replaces CompactFlash facility
SATA (Serial ATA)- Triple-channel Serial ATA 3Gbps available for J2/P2 rear I/O option
* Suitable rear I/O transition module VRM-CCT-RIO (2 x system-internal SATA, 1 x eSATA for attachment of external devices)
* Intel® Matrix Storage Technology MST (Raid 1.0, Matrix


Request a Quote for Ordering Info

See more products in 3U System Blades

Read the Datasheet

← Return to previous page

V Rose Microsystems - JKM Building
309 West Montgomery Street, Suite 16A
Johnstown, NY 12095 USA
Phone Number: 518-762-1288
Fax Number: 518-762-4399

This website may contain inaccuracies or typographical errors; V Rose Microsystems, Inc. will try to maintain the website's accuracy. V Rose Microsystems, Inc. may make improvements and/or changes in the products and services described in this site at any time without notice.
... ...
All Rights Reserved V Rose Microsystems, Inc. 2002-2010