|
The VRM-R4M-100 Processor Card is a high-performance network processor AdvancedMC™ (PrAMC) card designed for use in ATCA or MicroTCA systems. The R4M-100 is compliant with PICMG AMC.0 Revision 2.0 Mid-Size or Full-Size form factor standards. Featuring the latest RMI XLS416 quad core processor with up to a 1.2GHz clock rate, the VRM-R4M-100 can be delivered with up to 8GB of 72-bit wide DDR2 ECC memory running up to 800 MHz. The RMI XLS416 is a multicore, multi-threaded MIPS64® processor with a rich set of Integrated I/O Features:
Central Processing Units (CPUs)
• RMI XLS 416 Processor Family featuring four 64bit Processing Cores
• Up to 1.2 GHz with 1MB L2 cache
• Up to 8GB of DDR2 Memory w/ECC on x72 bus
• Autonomous Security Acceleration Engine (SAE) at 2.5 GBps
• Network Hardware Acceleration with IEEE1588 compliant PTP Controller
I/O Capabilities
• AMC.2 Dual 1000Base-BX Ports configured as Type E2 (Lanes 0,1)
• AMC.2 Dual 1000Base-BX Ports configured as Type 2 (Lanes 8,9)
• Quad (4) Dual 10/100/1000Base-T Ports on Front Panel (RJ45) or Quad(4) 1000-Base-BX Ports to lanes 17-20 on AMC connector for Rear RTM I/O Support
• AMC.1 PCIe Type 4 (Lanes 4-7) or Type 1 (Lane 4) or a build option for AMC.4 SRIO (Lanes 4-7) or Type 1 (Lane 4)
Mass Storage
• Dual Redundant Soldered 256MB NANDFlash
Boot Support
• NANDFlash, Network (GigE), Serial Console Clocks
• PCIe Clock Input on AMC Connector, CLK3/FCLKA
• Telco Clock Input on AMC Connector, TCLKA differential pair input converted to single ended connection to XLS416
Mechanical
• Standard AMC Full-Size or Mid-Size Form Factor LEDs
• Blue hot swap, green card status, and red out of service per AMC specification
Environmental
• Operating Temperature: 0 to 55C
• Humidity: 0 to 95% non-condensing
• Typical Power: 38W (Worse Case: 44W)
|
Request a Quote for Ordering Info See more products in AdvancedMCRead the Datasheet
|