Product: VRM-PMC-8266-OC3

The VRM-PMC-8266-OC3 is a telecommunications interface board in PMC form factor. Based on the Motorola MPC8266 “Power Quicc II” CPU, the VRM-PMC-8266-OC3 is targeted at telecom applications with a need for a powerful and versatile platform, such as applications using SS7, ISDN, ATM, VoP or any combination of these protocols. As the MPC8266 processor supports IMA (Inverse Multiplexing for ATM), the VRM-PMC-8266-OC3 is an ideal single board platform to interface between TDM standards such as E1/T1/J1 and cell oriented standards such as ATM.

Features:

CPU: Motorola MPC8266 “PowerQuicc” at 166-300MHz
PCI Interface and Compliance: MPC8266 on-chip PCI Bridge (33MHz/66MHz), PCI Rev 2.2
H.110: OKI CT812, H.110 on PMC P14 connector
DRAM: 32-256MB SDRAM (PC-100, 64 bit) installed in SODIMM slot
Flash PROM: 16 or 32MB Flash PROM (32bit)
Line Interface: four primary rate E1/T1/J1 lines (1.431) on standard RJ45 connectors at front panel supplied by Infineon PEB22554 “QuadFalc”
Networking: OC3 SDH/STM1 optical fibre on standard connector at front panel (SC duplex single or multi mode transceiver)
Indicator LEDs: 4 software programmable LEDs at the front panel
Operating System Support and Firmware: OK-1, VxWorks, LINUXSS7, ISDN. IMA driver and others
Power Consumption: 3.3V 0.5A (max), 5.5V 0.8A (max)
Environmental:
Temperature (operating): 0ºC to +60ºC with forced air cooling
Temperature (storage): -40ºC to +85ºC
Relative Humidity: 10% to 90% at +55ºC (non condensing)
Standard Compliance: P1386 and P1386.1/Draft 2.0

Request a Quote for Ordering Info

Read the Datasheet