Product: VRM-PMC-STM1-X-X

The VRM-PMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 “Power Quicc II” processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS, the VRM-PMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

Features:

CPU: Motorola MPC8280 “PowerQuicc II” at 333MHz or 450 MHz.
PCI Interface and Compliance: MPC8280 on-chip PCI Bridge, 32bit/33MHz, PCI Rev. 2.2
H.110 Bus: OKI CT812, H.110 on PMC P14 connector
DRAM: 256MB SDRAM (PC-100, 64 bit) installed in a SODIMM slot
Flash PROM: 16 or 32MB Flash PROM (32bit)
Line Interface: Four primary rate E1/T1/J1 lines (1.431) on standard RJ45 connectors on the front panel supplied by Infineon PEB22554 “QuadFalc”.
Serial I/O: RS232 compatible on front panel
Networking: 100BaseT Ethernet (IEEE 802.3) on standard RJ45 connector on the front panel
Indicator LEDs: 6 software programmable LEDs and 2 system status indicator LEDs on the front panel
Operating System Support and Firmware: OK-1, VxWorks, LINUXSS7, ISDN and others
Power Consumption: 3.3V 0.85A typ., 5V 0.55A typ
Environmentals:
Temperature (operating): 0ºC to +60ºC with forced air cooling
Temperature (storage): -40º to +85ºC
Relative Humidity: 10% to 90% at +55ºC (non-condensing)
Standard Compliance: P1386 and P1386.1/ Draft 2.0.

Request a Quote for Ordering Info

Read the Datasheet